Hellobox V5 firmware release 20191016A

yewin
T0
T0
Posts: 4
Joined: Sat Jan 12, 2019 3:24 pm

Re: Hellobox V5 firmware release 20191016A

Post by yewin » Thu Oct 17, 2019 9:11 am

Thanks.

User avatar
machteck
T2
T2
Posts: 44
Joined: Wed Feb 06, 2019 1:19 am
Location: Texas

Re: Hellobox V5 firmware release 20191016A

Post by machteck » Thu Oct 17, 2019 10:18 pm

Is this supposed to open the AFN channels ?

kadok
T0
T0
Posts: 1
Joined: Fri Oct 18, 2019 2:04 am

Re: Hellobox V5 firmware release 20191016A

Post by kadok » Fri Oct 18, 2019 2:17 am

this firm ware saport hello box v8?

skj1969
T0
T0
Posts: 1
Joined: Tue Aug 13, 2019 12:00 pm

Re: Hellobox V5 firmware release 20191016A

Post by skj1969 » Fri Oct 18, 2019 12:20 pm

Hello.
I installed the update yesterday but there is a problem with the keys.
Once you tried to insert a key (I tried this with biss & tandberg) at the momento to save it (by pressing the red button on the remote) a message saying "USB device disconnected" appears and the key is not saved into the list.
I tried, in the biss case, by entering after the bar code apperead, by pressing the blue key in the remote once the channel was loaded and also directly in the biss menu of the keys, all of them with the same result
I hope this can be solved because this version apparently works better than the previous one (with the exception of this issue)
Fortunately I was able to return to the previous state of the receiver
Regards.

farzam828
T0
T0
Posts: 1
Joined: Sun Oct 20, 2019 1:34 am

Re: Hellobox V5 firmware release 20191016A

Post by farzam828 » Sun Oct 20, 2019 1:44 am

hello..can you send me the file...thank you

User avatar
machteck
T2
T2
Posts: 44
Joined: Wed Feb 06, 2019 1:19 am
Location: Texas

Re: Hellobox V5 firmware release 20191016A

Post by machteck » Mon Oct 21, 2019 2:18 am

farzam828 wrote:
Sun Oct 20, 2019 1:44 am
hello..can you send me the file...thank you
Second post viewforum.php?f=3

Yawwilson
T4
T4
Posts: 299
Joined: Sat Dec 29, 2018 7:10 pm

Re: Hellobox V5 firmware release 20191016A

Post by Yawwilson » Tue Oct 22, 2019 6:55 am

skj1969 wrote:
Fri Oct 18, 2019 12:20 pm
Hello.
I installed the update yesterday but there is a problem with the keys.
Once you tried to insert a key (I tried this with biss & tandberg) at the momento to save it (by pressing the red button on the remote) a message saying "USB device disconnected" appears and the key is not saved into the list.
I tried, in the biss case, by entering after the bar code apperead, by pressing the blue key in the remote once the channel was loaded and also directly in the biss menu of the keys, all of them with the same result
I hope this can be solved because this version apparently works better than the previous one (with the exception of this issue)
Fortunately I was able to return to the previous state of the receiver
Regards.
With the issue of USB disconnected implies that the flash drive is not having good contact..either you use a different flash drive or you try manipulating flash drive manually to see if you can get good contact...

Post Reply