RS232 upgrade tool for Hellobox V5

User avatar
DVBFinder
Moderator
Moderator
Posts: 56
Joined: Sat Dec 22, 2018 8:57 am

RS232 upgrade tool for Hellobox V5

Post by DVBFinder » Sun Dec 23, 2018 2:27 am

Please follow our Facebook Pages:
DVBFinder
DVBPlayer
Hellobox Electronics

kot
T0
T0
Posts: 4
Joined: Tue Dec 25, 2018 3:09 pm

Re: RS232 upgrade tool for Hellobox V5

Post by kot » Thu Feb 07, 2019 3:46 pm

this flashing sw alive my dead Hellobox V5, thanks a lot
You do not have the required permissions to view the files attached to this post.

7zawhtay
T1
T1
Posts: 7
Joined: Tue Jul 30, 2019 8:37 am

Re: RS232 upgrade tool for Hellobox V5

Post by 7zawhtay » Mon Sep 02, 2019 4:28 pm

How did u do it?
Step by step please.

7zawhtay
T1
T1
Posts: 7
Joined: Tue Jul 30, 2019 8:37 am

Re: RS232 upgrade tool for Hellobox V5

Post by 7zawhtay » Mon Sep 02, 2019 4:54 pm

I also flash with rs232 and it just showed.
You do not have the required permissions to view the files attached to this post.

car mel
T3
T3
Posts: 75
Joined: Mon Jan 21, 2019 7:50 pm

Re: RS232 upgrade tool for Hellobox V5

Post by car mel » Mon Sep 02, 2019 5:16 pm

SAM I 10'- Dreambox DM800HDse-Hellobox V7, V5plus-GTMedia V8Nova/Pro2
Scanning the arc from 43w to 133w

hanwool
T1
T1
Posts: 19
Joined: Tue Dec 25, 2018 1:52 pm

Re: RS232 upgrade tool for Hellobox V5

Post by hanwool » Sun Dec 01, 2019 12:23 am

upgrade tool fo hellobox V5 and V5 plus are different, please renew link downlod tool

tekmed
T1
T1
Posts: 6
Joined: Sun Dec 08, 2019 11:02 am

Re: RS232 upgrade tool for Hellobox V5

Post by tekmed » Mon Dec 09, 2019 6:11 pm

Last edited by tekmed on Mon Dec 09, 2019 6:13 pm, edited 1 time in total.

tekmed
T1
T1
Posts: 6
Joined: Sun Dec 08, 2019 11:02 am

Re: RS232 upgrade tool for Hellobox V5

Post by tekmed » Mon Dec 09, 2019 6:13 pm

hanwool wrote:
Sun Dec 01, 2019 12:23 am
upgrade tool fo hellobox V5 and V5 plus are different, please renew link downlod tool
Tool is here http://www.pctvlab.com/gsky/software/V5_upg_tool.rar

elanimal19
T0
T0
Posts: 4
Joined: Fri Dec 06, 2019 6:56 pm

Re: RS232 upgrade tool for Hellobox V5

Post by elanimal19 » Sat Dec 28, 2019 5:19 am

ineed help

Serial Port Opened
monitor start
download start
Please reboot the STB manually.
Change baudrate to 115200.
monitor stop
Sync Succeed.
Sending boot init...
Send boot init completed.
boot init run successfully.
SendClient.
Sending Client is complete.
Client is up.
Client Functionality is good.
uboot run successful
download successful!
monitor start
usb start;fatload usb 0 83000000 hellobox.bin;sf burn 83000000 0 400000;
(Re)start USB...
auto_detect_usb_port --- usb default sel port 1
port_sts0:0x00000803 port_sts1:0x00000803
auto_detect_usb_port --- usb sel port 1
USB: usb_debug
need usb1 plug in....
usb1 device connect port status :0x1803
port1 reset down port status :0x8001205
ehci_hcd_init...
Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
scanning bus for ethernet devices... 0 Ethernet Device(s) found

** Unable to use usb 0:1 for fatload **
do_spi_flash_uboot_save offset[0] len[2d600000]
spi0 is already setup!!!
SF: spi flash status register: 0x00, 0x00
SPI: Detected EN25Q32B with erase size 64 KiB, total 4 MiB

Vishnu
T0
T0
Posts: 1
Joined: Tue Dec 03, 2019 12:16 am

Re: RS232 upgrade tool for Hellobox V5

Post by Vishnu » Mon Feb 03, 2020 1:57 pm

Use CH341a mini programmer with aligator clip.very easy to program.my hellobox v5 hd was dead while try to connecting wifi adaptor.i tried win stb software but unable to recover. then tried CH341 a,It recovered.

Post Reply