My device died after the update? new version (usb)

Post Reply
formula
T1
T1
Posts: 11
Joined: Sat Jan 30, 2021 9:33 am

My device died after the update? new version (usb)

Post by formula » Mon Apr 12, 2021 2:23 pm

My device died after the update, what should I do? The red bulb only works?
new version not old version (usb) !

Jagosto
T0
T0
Posts: 1
Joined: Thu Mar 18, 2021 9:01 am

Re: My device died after the update? new version (usb)

Post by Jagosto » Thu Apr 15, 2021 11:22 am

I do have the same problem this recovery firmware ( auto_burn.fac) as been sento to me to try recovery but I have no luck 😭😭

dinand
T1
T1
Posts: 8
Joined: Tue Aug 04, 2020 11:44 am

Re: My device died after the update? new version (usb)

Post by dinand » Sat Apr 17, 2021 5:40 am

1. Turn off the Hellobox 8 power
2. Rename the firmware to auto_burn.fac, and place it in the USB root directory
3. Insert the USB into Hellobox 8, and turn on the power
4. The box will display "USB" for about 5~10 seconds if the USB is detected correctly, and the upgrade process will start automatically. The panel will show the progress "U0xx"
5. When finished, "FFFF" will be displayed.
6. REMOVE THE USB AND DELETE THE auto_burn.fac FILE IN USB!!!
7. Turn off and turn on the box, it will be back

formula
T1
T1
Posts: 11
Joined: Sat Jan 30, 2021 9:33 am

Re: My device died after the update? new version (usb)

Post by formula » Mon May 10, 2021 7:32 am

Hi
1- please i want hellobox8.xml for winstbupgrader because it dmg.

error msg:
Aparse config file error!


2- please load hellobox8_upg in in another host:

https://drive.google.com/open?id=1ldPlZ ... aRLpji_V-M

i can't download it.

regards

formula
T1
T1
Posts: 11
Joined: Sat Jan 30, 2021 9:33 am

Re: My device died after the update? new version (usb)

Post by formula » Mon May 10, 2021 2:05 pm


sathex
T1
T1
Posts: 9
Joined: Sat Mar 16, 2019 1:09 pm

Re: My device died after the update? new version (usb)

Post by sathex » Fri May 14, 2021 11:00 am

i can't download it.
1.jpg
is this work like rs232 (usb ttl)
do not wait and test, there is nothing to fear...

just refer to readme_download.jpg for hellobox8_upg usuage
You do not have the required permissions to view the files attached to this post.

formula
T1
T1
Posts: 11
Joined: Sat Jan 30, 2021 9:33 am

Re: My device died after the update? new version (usb)

Post by formula » Fri May 14, 2021 2:14 pm

sathex wrote:
Fri May 14, 2021 11:00 am
i can't download it.
1.jpg
is this work like rs232 (usb ttl)
do not wait and test, there is nothing to fear...

just refer to readme_download.jpg for hellobox8_upg usuage
thank you, but when i download it, my tablet save it:
Helobox8...... rar.mhtml

the size: 1.2 Mb

not the right rar file!


please upload it in mediafire.com

sathex
T1
T1
Posts: 9
Joined: Sat Mar 16, 2019 1:09 pm

Re: My device died after the update? new version (usb)

Post by sathex » Sat May 15, 2021 8:34 am

the size: 1.2 Mb

not the right rar file!


please upload it in mediafire.com

https://www.mediafire.com/file/gx292hii ... 0.rar/file

formula
T1
T1
Posts: 11
Joined: Sat Jan 30, 2021 9:33 am

Re: My device died after the update? new version (usb)

Post by formula » Sun May 16, 2021 4:48 am

sathex wrote:
Sat May 15, 2021 8:34 am
the size: 1.2 Mb

not the right rar file!


please upload it in mediafire.com

https://www.mediafire.com/file/gx292hii ... 0.rar/file
thank you mr. sathex

after download, i used the program (Hellobox8_upg. exe), i got error msg:

serial port opened
reboot the stb manuallysync success
download start
change baudrate to 115200
sending boot init
send boot init completed

boot init run failed
m_download_thrd is stop!
m_sp__mnt_thrd is stop.

sathex
T1
T1
Posts: 9
Joined: Sat Mar 16, 2019 1:09 pm

Re: My device died after the update? new version (usb)

Post by sathex » Mon May 17, 2021 12:44 pm

1st solution:
uses a former flash or dump of preference
Renow your flash in :
auto_burn.fac

of course with extention "fac" and not "bin"

Format your flash disk (FAT32)
Used it with the program (hellolox8_upg Exe) as described in the photos.

if don't work...
rename the upgrade sw file to flash.bin,and then storage it in the USB

...

2EM solution:
uses the same program but on upgrade
Do not forget about Click on "Erase All"
.....

finally if the problem persists you have to see if there is a hard problem
See also if there is an error in the procedure and configuration. ect.

Review what is described on this page in particular
the "auto upgrade" part
https://www.freedvb.com/viewtopic.php?f=25&t=14226
...

Note:
Personally I'm having fun with my receivers
By making transformations of all kinds...
And I have never had difficulties in their initial state!
so for you too
it sufits to find the right configuration.

Finally I think your problem comes from the procedure
because it is important to put the program in the root C: \
the program should work

:mrgreen:

Post Reply