how to upgrade Hellobox V5 plus through RS232 serial port?

[Parithi]

"can't sync with btinit_ddr2_400m_debug.img"

I am getting the above in the process of waking up a dead V5plus that has been upgraded to Hellobox6.
Kindly help with solution

Use flashing CH341A

Make sure the com port is set to 115200 , Rename the dumped bin file to hellobox_v5_plus.bin

Use Cross null RS232 cable

I have tried using ch341a. Using ASprogrammer. It can read the flash ic. But cannot erase it. Error says write protected.
How did you make it successful. Please help.

[Shahin sarkar]

1. Copy bin file to a USB device and change to the file name to "hellobox _ V5 _plus.bin"
2. Insert the USB device to Hellobox V5 Plus Support and receiver
3. Connect Hellobox V5 plus with computer through RS232 cable
4. Run "WinSTBUpgrader.exe "on computer
5. Select and Open serial port
6. Click" download "page, select the config file " V5 _plus_8M.xml "
7. Click" Start "
8. Power on Hellobox V5 plus, and wait ...
After upgrading is done, Hellobox V5 plus will reboot automatically.

Please enjoy and download the tool RS232 here :
https://my.pcloud.com/publink/show?code ... CQs8yxQ6SX

Link is dead.
There is any other new link? Pls..

[telerele]

Anybody can send the file

WinSTBUpgrader : http://www.mediafire.com/file/05rp91igj ... l.rar/file