muxed stream for TVHEADEND

Post Reply
nzobs
T1
T1
Posts: 12
Joined: Wed Aug 26, 2020 12:00 am

muxed stream for TVHEADEND

Post by nzobs » Wed Aug 26, 2020 12:21 am

Hello, is there any way to connect S2 to tvheadend on another device (eg. Raspberry PI) - either via wifi, ethernet or USB?

And is it possible to send the muxed stream for the tvheadend? If I could do this, then with 2x S2 devices I could watch, record and stream every free channel available in New Zealand on my whole network.

wsnake
T1
T1
Posts: 7
Joined: Tue Jun 18, 2019 6:45 pm

Re: muxed stream for TVHEADEND

Post by wsnake » Sun Oct 11, 2020 8:54 pm

nzobs wrote:
Wed Aug 26, 2020 12:21 am
Hello, is there any way to connect S2 to tvheadend on another device (eg. Raspberry PI) - either via wifi, ethernet or USB?

And is it possible to send the muxed stream for the tvheadend? If I could do this, then with 2x S2 devices I could watch, record and stream every free channel available in New Zealand on my whole network.
This solution will help you: minisatip http://old-forum.alexelec.tv/viewtopic.php?f=22&t=5309

nzobs
T1
T1
Posts: 12
Joined: Wed Aug 26, 2020 12:00 am

Re: muxed stream for TVHEADEND

Post by nzobs » Sun Oct 11, 2020 9:25 pm

wsnake wrote:
Sun Oct 11, 2020 8:54 pm
nzobs wrote:
Wed Aug 26, 2020 12:21 am
Hello, is there any way to connect S2 to tvheadend on another device (eg. Raspberry PI) - either via wifi, ethernet or USB?

And is it possible to send the muxed stream for the tvheadend? If I could do this, then with 2x S2 devices I could watch, record and stream every free channel available in New Zealand on my whole network.
This solution will help you: minisatip http://old-forum.alexelec.tv/viewtopic.php?f=22&t=5309
There are 69 pages with a discussion on lots of different ideas on that thread! Would you be able to tell me what I should be looking for?

wsnake
T1
T1
Posts: 7
Joined: Tue Jun 18, 2019 6:45 pm

Re: muxed stream for TVHEADEND

Post by wsnake » Sun Oct 11, 2020 9:55 pm

nzobs wrote:
Sun Oct 11, 2020 9:25 pm
wsnake wrote:
Sun Oct 11, 2020 8:54 pm
nzobs wrote:
Wed Aug 26, 2020 12:21 am
Hello, is there any way to connect S2 to tvheadend on another device (eg. Raspberry PI) - either via wifi, ethernet or USB?

And is it possible to send the muxed stream for the tvheadend? If I could do this, then with 2x S2 devices I could watch, record and stream every free channel available in New Zealand on my whole network.
This solution will help you: minisatip http://old-forum.alexelec.tv/viewtopic.php?f=22&t=5309
There are 69 pages with a discussion on lots of different ideas on that thread! Would you be able to tell me what I should be looking for?
Download the firmware from the last post 30082020_gx6605s_gx3235s_satip_linux_fw_only.zip http://old-forum.alexelec.tv/viewtopic. ... 680#p31377 But read from page 9 to end http://old-forum.alexelec.tv/viewtopic. ... 9&start=80 to understand where to connect and how to flash your receiver. There is everything in detail with pictures.

Post Reply